High temperature resistance material rotating switch (flange)

• 
• 
• 
• 
• 

ZW-UZK series High temperature resistance material rotating switch <strong> (flange)</stron…

Productoverview:

ZW-UZK series High temperature resistance material rotating switch (flange) is used as a solid material (including powdered, granular, massive, gelatinous material level controller etc.). Impeding level switch has good sealing property, strong overload capacity (with overload protection), light, easy output contact capacity etc..According to the different proportion of the material can be realized by adjusting the tension of the spring, the parts contacting material are made of stainless steel materials. Rotary paddle level switch is widely used in chemical, plastic, cement, feed, pharmaceutical, food and other industries.

Two, work principle:

ZW-UZK series <strong> resistance</strong> <strong style="white-space: normal;"> temperature resistance spiral level switch (flange)</strong> using permanent magnet motor drives the rotating blades when the detected material rises to the leaf position, the blade rotation is blocked, the resistance of the transmission shaft is transferred to the terminal box detection device, detection device is a switch signal output, and cut off the power supply to the blade stops rotating.When the material is decreased when the blade resistance disappears, the detection device depends on the tension of the spring back to its original state, restore blade rotating state. For use in the proportion of different materials, can adjust the spring tension, the proportion of large spring tension adjustment to the strongest to the weakest, otherwise adjust.

Three, application:

ZW-UZK series <strong> resistance</strong> <strong style="white-space: normal;"> temperature resistance spiral level switch (flange)</strong> for detection of solid materials (powder, granular) level of material field control device, its unique sealing design, strong overload protection ability and easy installation, which is widely used in feed, food, pharmaceutical, chemical, plastics, building and fertilizer industry.

Four, main features:

1, the United States, three bearing support, more reliable operation;

2, the original seal design, can prevent dust infiltration along the axis (patent design);

3, the torque is stable and reliable, and the torque adjustable;

4, leaves under heavy load, clutch slipping, protect the motor from being damaged;

5, do not have to remove from the whole tank, you can easily check the maintenance of internal components;

6 wiring box, IP65 design, good sealing, reliable use outdoor installation;

7, lightweight, easy to install;

8, applicable to a wide range of industries, such as steel, cement, electricity, feed, chemical plastic, chemical fertilizer etc..

Five, technical parameters:

1, power supply: 220VAC/110VAC/24VDC;

2, power consumption: 4W;

3, contact capacity: 10A/250VAC SPDT (SPDT);

4, blade speed: 1RPM (RPM);

5, torque: 1.0Kg * CM;

6, the material density is not less than 0.5g/cm3;

7, working temperature: -10 to 80 DEG C (the highest order 400 C);

8, insulation resistance is not less than 100M;

Dielectric strength: 1500V*1min, 9;

10, protection grade: IP65;

11, blade material: SUS304.

Six, the installation requirements include:

1, before installation, please confirm whether the supply voltage is consistent with the voltage signs above.

2, make sure that the material density, choice of shape and size, the best leaf general, leaf density is smaller.

3, before installation to confirm horizontal installation or vertical installation

I, the level of installation, the blade and the level down to form a 10~20 degree angle of installation, to reduce the impact of the material.

II, the level of installation, wiring box line inlet should be vertical downward, cable fixing nuts must be locked, if the conditions can add fangyuzhao.

4, installation should be avoided in the material, the mouth of the site, when cannot avoid protective baffle installed in 200mm at the top of the switch, in order to protect the blade from the material impact.

Do not knock the transmission parts and blade parts 5, installation of the product, so as to avoid unnecessary damage.

Seven, the selection of encoding:

Eight, order note:

1, confirm the voltage of 24Vac, 110V, 220V OR 240V, 50/60Hz;

2, confirm the installation (or side mounted on);

3, pay attention to the proportion of raw materials;

4, confirm whether the blade size can be inserted into the entrance holes or barrel flange.

Customer service service commitment:

1, our level switch series product quality problems within twelve months, responsible for free maintenance.

2, the warranty period if the products of our company have any quality problems, our company is responsible for free repair or replacement.

3, the warranty period if the user use undeserved, cause damage to the product, our company is responsible for the maintenance, collect the damaged parts cost.

4, after the warranty period of product quality problems, our company is responsible for the maintenance, collect the damaged parts cost.

5, if the user needs to our service, our company in the province of the user service personnel arrived at the scene within 12 hours, arrived at the scene 48 hours outside users.