Local temperature display instrument

• 

ZW-YC series Local temperature display instrument According to the international standard of importe…

Productoverview:

ZW-YC series Local temperature display instrument According to the international standard of imported chips into production, has the characteristics of high precision and high stability, low error, low power, stainless steel shell production, make the protection more robust, more beautiful. The liquid crystal display screen using low power integrated circuit manufacture, display more clear, reading more convenient, built-in high capacity battery, can work continuously for more than 5 years, the battery power supply to solve the previous problem of embedded products to the power supply cable, become industrial production field for high temperature display instrument.

Two, application:
ZW-YC series Local temperature display instrument Stainless steel shell and silicone rubber seal, with dust, moisture resistance, anti vibration characteristics, suitable for a variety of harsh environments in the installation and use of. This instrument also has strong anti explosion performance, measuring instruments metallurgy, chemical and power, textile and other industries preferred.

Three, the structure of the material:
1, shell material: 1C18Ni9Ti;
2, panel: glass + PVC mask;
3, the outer tube material: 1C18Ni9Ti.

Four, main features:
1, use the micro power consumption, high precision, low drift all imported integrated circuit, which makes the minimum energy consumption.
2, has strong anti-jamming ability and fast reaction speed measurement.
3, Aluminum Alloy shell and silicon rubber sealing with dust, moisture resistance, suitable for all kinds of bad site environment installation and use.
4, and the thermal resistance and thermocouple with the installation method for a variety of occasions.
5, due to the use of battery powered and has strong explosion-proof performance, especially suitable for the places without power supply.
6, applicable to all kinds of thermal resistance, thermocouple or other source display.

Five, technical parameters:
1, measurement range: -50 ~ 600 c;
2, sensor: Pt100;
3, accuracy: 0.5% + 1;
4, sampling time: 1-5 seconds;
5, display: 3 LCD;
6, the power supply battery: built-in 3.6V/2.4Ah lithium battery industry in 1, more than 3 years of continuous use;
7, environmental conditions: temperature: -20~70 degrees;
8, humidity: 90%RH;
9, connection: M27 * 2 or according to user requirements.

Six, adjusting method:
1, the counterclockwise rotation of the outer dial gland, open the gland, gently prying with the word (word play only to pry the gasket contact with the housing site below (not directly prying the LCD screen glass, LCD screen will prevent damage), and more gently pry.
2, open a "Z" button and the "S" button on the LCD screen on the back, if the temperature display and actual temperature deviation, can fine tune the "Z" key, the "S" key can not adjust.
3, temperature regulation must have the standard thermometer as the standard, and the temperature meter placement relatively constant temperature to the occasion, and then placed in a relatively constant temperature stable 8 hours after the success of regulation occasions, the temperature display temperature deviation Zui (0.5% range values for normal deviation) can be. Adjustment methods are as follows:
A, if the temperature is higher than the actual temperature display, then the "Z" button clockwise fine-tuning. If the temperature is lower than the actual temperature display, then the "Z" button counterclockwise fine-tuning. You can.
B, the "S" key must pass through the manufacturer's technical personnel with special testing instruments for regulation, any other personnel shall not use this key.

Seven, matters needing attention:
1, in storage, installation, use and transport process, to avoid the collision protection tube, prohibit the protection tube bending and deformation.
2, installation, non twist instrument shell.
3, the instrument shall work normally in the -30 to 80 DEG C ambient temperature.
4, the instrument can often work in the temperature scale range 1/2 ~ 3/4.
5, the protective tube immersionmedium measured in length must be greater than the length of the sensing element, this is done in order to ensure the accuracy of measurement.
6, do not use media exposure in measuring container.
7, the use of the process should pay attention to check in time, probably in about 6 months.

Eight, the selection of encoding:

Selection of product description:
Name： ZW-YC-100-A0P0S-50~100-8GM27*2-300
Spectrum Description: Name: stainless steel shell, precision Zero point five Class, PT100 Without resistance sensor, remote signal output, temperature range: -50~100 C, universal meter, straight bar access, M27*2 Threaded connection, inserting depth 300mm. .

The design and selection of notes:

One Type;
Two Indexing, no.;
Three Precision level;
Four And the installation of fixed form;
Five The length or depth of insertion.

Customer service service commitment:
1, my company sold Zhongwei Display instrument series The product within 12 months of quality problems, responsible for free maintenance.
2, the warranty period if the products of our company have any quality problems, our company is responsible for free repair or replacement.
3, the warranty period if the user use undeserved, cause damage to the product, our company is responsible for the maintenance, collect the damaged parts cost.
4, after the warranty period of product quality problems, our company is responsible for the maintenance, collect the damaged parts cost.
5, if the user needs to our service, our company in the province of the user service personnel arrived at the scene within 12 hours, arrived at the scene 48 hours outside users.