Liquid crystal intelligent conditioner

• 

Type LCD intelligent control device of input and output can be arbitrary set with a big Z technical …

Products overview:
ZW series - TLAType LCD intelligent control apparatusAs input thermocouple, heat resistance, current, voltage, two wire power supply, such as signal, the same product can have the temperature transmitter, isolator, distributor, millivolt transmitter, and other functions, and the types and range of input and output can be set up online.Input signal after operation, such as interference suppression processing, single or double line analog output isolation of current or voltage signal, and to ensure electrical isolation between the input, output, power performance.
ZW series - TLAType LCD intelligent control device also made the technique of synchronous measurement, the output value LCD digital display, can online observation of actual input and output value theory, at the same time realize the online fault diagnosis, the above technology has the international advanced level.
Applicable occasions:
ZW series - TLAType LCD intelligent control device to replace the traditional kinds of transmitting instrument, its variable by nature makes this product has a very extensive applicability and flexibility.This product can be with the unit combination instrument and DCS, PLC systems, such as in oil field, electric power, metallurgy, petrochemical, manufacture industry has been widely applied in major projects.
Three, the main features:
1, the single-chip microcomputer unique and powerful software function and isolator's own excellent hardware electrical properties for the stability and reliability of the product provides a solid guarantee.
2, intelligent isolator can use communication protocol USES the means of communication and hand connection, online observation input, the output value.
3, without using zero and full of external potentiometer to digital signal automatic/manual adjustments.At the same time can be automatically compensate to the input signal.
4, intelligent isolator of the input signal is the high and low frequency interference signal provides the software on the suppression and processing.Even in high power frequency conversion control system is also capable of reliable operation.
5, single or double input for the linear current or voltage signal of the road.
6, analog output isolation of single, double current or voltage signal and the input, output, and provide a good electrical isolation between the power.
Four, the technical parameters:
1, the system transmission accuracy: + / - 0.2% x f. S.
2, LCD digital display, double row, according to the four floating-point decimal;
3, display resolution: 1 word + bottom;
4, temperature drift: 0.005% f. S / ℃ or less;
5, working temperature: industrial standards - 10 ~ + 55 ℃;
6, cold junction compensation accuracy: + / - 1 ℃;
7, measure the heat resistance said allows the lead resistance: 50 or less Ω;
8, external power supply voltage: the light is not higher than 28 v, loaded with no less than 22 v.
9, input impedance: current: 100 Ω;Voltage: 500 k Ω;
10, allowing external load impedance output current: 0-500 Ω 4-20 ma output;0 to 10 0 and 1 k Ω, the output of the ma need more load capacity when ordering, please;
11, electromagnetic compatibility: meet IEC61000-4 - and in 95 the fourth category specified in () bad industrial site environment on the product's resistance to electromagnetic interference requirements;
12, input/output/power/communication/dual insulation strength: 1500 v or higher. The ac;
13, storage and transportation environment temperature: - 40 ~ + 80 ℃;
14, relative humidity: 10-90% RH (40 ℃);
15, power supply, communication: AC 95 ~ 265 v dc: DC12V ~ 32 v (reverse connect protection);
16, the input power: 0.9 ~ 1.8 W (associated with types, see the product manual about the calculation method of the input power in the appendix).
17, communication interface, RS232 or RS485, MODBUS protocol software (optional).
18, overall dimensions: width * deep high: 22.5 * 100 * 115 mm;
19, net weight: 20 g to 140 g +.
Five, the selection table:

The input signal type: 
Dc current:0~10mA，4~20mA，0~20mA
Dc voltage:0~5V，1~5V，0~10V
Thermocouple:K，E，S，B，J，T，R，N
milli V:0~20mV，0~75mV，0~100mV
Hot resistance:Pt100、Cu100、Cu50、BA2、BA1、G
Please note: need special signal type determine when ordering 
The output signal type: 
Dc current:0~10mA、4~20mA、0~20mA
Dc voltage:0~5V、1~5V、0~10V
Please note: need special signal type determine when ordering

Sixth, the input signal failure state of the output Settings:
Input signal failure including input fault (including open circuit and short circuit) and the outrange two kinds of fault state, the corresponding display information please see the "liquid crystal display information" in the introduction.

After-sales service commitment: 
1, our company sold by weiLCD series intelligent control deviceProduct quality problem within 12 months, responsible for free maintenance. 
2, the warranty period, any quality problems such as the products of our company, my company is responsible for free repair or replacement. 
3, the warranty period, such as user improper use, damaged products, my company is responsible for the maintenance, charge damage parts cost. 
4, after the warranty period appear quality problem, my company is responsible for the maintenance, charge damage parts cost. 
5, such as user need to my company site services, to users in the province I company service personnel to reach the site within 12 hours, fujian association of foreign languages and user reach the site within 48 hours.