Throttle globe valve

• 

Throttle globe valve is a new type of throttle, cut-off and vent product. The valve adopts cage laby…

A brief introduction:
JJM8 series Throttle stop valve Is a new type of throttling and cut-off and venting products, the valve with a cage fan Legion throttling, with multistage throttle throttle effect, characteristics of obvious effect, reliable sealing, convenient operation and maintenance, etc..
1, normally closed: valve seal for pressure in the seat on the ****, to form a hard seal, soft and embedded on the valve flap and the valve seat sealing surface is pressed to form second sealing, double sealing structure ensures zero leakage of the valve, then the valve clack opened balance hole in the closing and opening of the valve, when the valve is a small force, the valve open and closed with a small torque.
2, the slow pressure state: valve at the bottom of the left seat sealing surface, the valve clack is close to the bottom surface of the cage set at the bottom edge of the bad, the valve flap and the cage diameter to form a sealing sleeve. Without direct vent relief, so as to achieve the relaxation effect.
3, throttle state: valve bottom carbonyl left seat, further open, small valve to form a throttle, high speed fluid through slow pressure throttling directly after the flow of small valve and the valve sleeve formed at the window break flow reached two throttle valve sleeve, due to the edge of the window is cutting surface, high voltage dielectric direct scouring when the throttle channel, the valve at the bottom of the medium to change the eddy current, reduce the direct scouring medium valve seat seal, so as to avoid direct scouring medium, at the same time as the valve sealing surface is tapered, can blow the dirt and impurities and the valve seat sealing surface of the sealing surface protection, in order to prolong the service life of the valve.
4, fully open state: valve in the fully open state, the valve in full emptying, less resistance in fluid in the popular, shorten the venting time, improve the venting valve effect.
Two, Throttle stop valve The characteristics of:
1. manufacturing standards: GB/T12224-2005 JB/T7747-1995;
2. connection: connecting thread (NPT, G, Rc, Rp... );
3. features: conical or spherical seal;
The 4. valve inspection and testing: GB/T13927-1992;
5. nominal pressure: 10000Psi;
6. suitable temperature: -29 to +538 DEG c;
7. suitable medium: water, oil, gas and other corrosive and non corrosive medium;
8. nominal diameter: DN6, DN10, DN15, DN20, DN25....
Three, Throttle stop valve The main part of the /Materials of main parts material:

Four, specifications:

Five, design of ordering and selection of notes:
1, the product name and model of the products of the nominal diameter of pressure material by the use of the medium temperature and products with the attachment so that we provide you the correct selection.
2, if you have special request, please specify when ordering products in.
3, if the unit has been selected by the design model, please press the model directly to our sales department order.
4, the occasion is very important when using more complex or the environment when you try to provide design drawings.
Six, customer service service commitment:
1, my company sold Zhongwei valve product quality problems within twelve months, responsible for free maintenance.
2, the warranty period if the products of our company have any quality problems, our company is responsible for free repair or replacement.
3, the warranty period if the user use undeserved, cause damage to the product, our company is responsible for the maintenance, collect the damaged parts cost.
4, after the warranty period of product quality problems, our company is responsible for the maintenance, collect the damaged parts cost.
5, if the user needs to our service, our company in the province of the user service personnel arrived at the scene within 12 hours, arrived at the scene 48 hours outside users.