XLPE Insulated Power Cable

• 

XLPE insulated power cables are manufactured in accordance with the national standard GB/T12706-2002…

A, product standards and scope:
XLPE insulated power cable According to People's Republic of China's national standard GB/T12706-2002 production, the standard equivalent international standard IEC60502-1997, is suitable for AC rated voltage 35kV and below middle and low voltage power distribution line.
Executive standard: GB12706-91 IEC502, IEC332-3 is equivalent to the standard
Usage: suitable for rated voltage U0/U and below 26/35KV for transmission and distribution system.
Characteristics: the working temperature of cable core: the maximum permissible does not exceed 90 degrees
The core circuit temperature not exceeding 250 degrees, not more than 5 seconds.
Two, XLPE insulated power cable Bending radius:
Single core cable bending radius: 20 + 5% (d+D);
Multi core cable bending radius: 15 + 5% (d+D).
Three, XLPE insulated power cable Laying temperature:

Four, <strong> XLPE power cable</strong> specifications:

The table shows included in the product standards, specifications and section, according to the requirements of users can also produce
Five, the scope of production:

Not included in the list of product standards, specifications and section, according to the requirements of users can also produce.
Sixth, conductor DC resistance:

3+2, 4+1, 3+1 cable, cable 3, 4 and 1 (the main core), 2 (auxiliary core) between equipment.

Seven, the flow of cable section:

Eight, <strong> XLPE insulated power cable</strong> model:

Nine, specifications said:
1:0.6/1KV copper core XLPE insulated PVC sheathed 120mm2 3 core XLPE power cable said: YJV0.6/1KV 3 * 120mm
2:8.7/10KV copper core XLPE insulated PVC sheathed steel tape armored core, 3 70mm2 high voltage XLPE power cable is YJV228.7/10KV 3 * 70.
Ten, delivery length: cable should not less than 100 meters, 50 meters above the allowed short-term delivery, the number does not exceed 10% of the total length of delivery; if there are special requirements of both supply and demand can be negotiated.